document number: 34127 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 15-mar-11 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high frequency, surface mount molded inductors imc-2220 vishay dale note (1) rated dc current based on the maximum temperature rise, not to exceed 40 c at + 85 c ambient features ? molded construction provides superior strength and moisture resistance ? compatible with vapor phase infrared and wave soldering methods (100 % tin plating) ? tape and reel packaging for automatic handling, 2000/reel ? compliant to rohs directive 2002/95/ec electrical specifications inductance range: 1.0 h to 10 000 h inductance and tolerance: 10 %, 5 % operating temperature: - 40 c to + 125 c storage temperature: - 40 c to + 125 c test equipment ? inductance and q measured on hp4191 ? srf measured on hp3755 ? dcr measured on hp34401 standard electrical specifications ind. (h) tol. test freq. (mhz) q min. srf min. (mhz) dcr max. ( ? ) rated dc current (ma) (1) l & q 1.0 10 % 7.96 10 95 0.030 1800 1.2 10 % 7.96 10 70 0.035 1700 1.5 10 % 7.96 10 55 0.040 1600 1.8 10 % 7.96 10 47 0.050 1400 2.2 10 % 7.96 10 42 0.060 1300 2.7 10 % 7.96 10 37 0.070 1200 3.3 10 % 7.96 10 34 0.080 1120 3.9 10 % 7.96 10 32 0.090 1050 4.7 10 % 7.96 10 29 0.110 950 5.6 10 % 7.96 10 26 0.130 880 6.8 10 % 7.96 10 24 0.150 810 8.2 10 % 7.96 10 22 0.180 750 10 10 % 2.52 10 19 0.210 690 12 10 % 2.52 10 17 0.250 630 15 10 % 2.52 10 16 0.300 580 18 10 % 2.52 10 14 0.360 530 22 10 % 2.52 10 13 0.430 480 27 10 % 2.52 10 11.5 0.520 440 33 10 % 2.52 10 10.5 0.620 400 39 10 % 2.52 10 9.5 0.720 370 47 10 % 2.52 10 8.5 0.850 340 56 10 % 2.52 10 7.8 1.00 310 68 10 % 2.52 10 7 1.20 290 82 10 % 2.52 10 6.4 1.40 270 100 10 % 0.796 20 6 1.60 250 120 10 % 0.796 20 5.4 1.90 230 150 10 % 0.796 20 4.8 2.20 210 180 10 % 0.796 20 4.4 2.80 190 220 10 % 0.796 20 3.9 3.40 170 270 10 % 0.796 20 3.6 4.20 155 330 10 % 0.796 20 3.2 4.90 140 390 10 % 0.796 20 2.9 5.80 130 470 10 % 0.796 20 2.6 7.00 120 560 10 % 0.796 20 2.4 8.50 110 680 10 % 0.796 20 2.2 10.0 100 820 10 % 0.796 20 2 13.0 90 1000 10 % 0.252 20 1.8 15.0 85 1200 5 % 0.252 20 1.5 17.0 75 1500 5 % 0.252 20 1.4 20.0 70 1800 5 % 0.252 20 1.3 30.0 60 2200 5 % 0.252 20 1.2 35.0 55 2700 5 % 0.252 20 1.1 55.0 45 3300 5 % 0.252 20 1 60.0 40 3900 5 % 0.252 20 1 70.0 38 4700 5 % 0.252 20 0.9 78.0 36 5600 5 % 0.252 20 0.8 85.0 33 6800 5 % 0.252 20 0.7 110.0 30 8200 5 % 0.252 20 0.6 125.0 28 10 000 5 % 0.0796 15 0.5 150.0 25 dimensions in inches [millimeters] 0.028 0.004 [0.7 0.1] 0.221 0.012 [5.6 0.3] 822 0.157 0.008 [4.0 0.2] 0.197 0.008 [5.0 0.2] 0.157 0.008 [4.0 0.2] 0.043 [1.1] ref. 0.157 [4.0] ref. 0.177 [4.5] ref. 0.079 [2.0] ref. 0.079 [2.0] ref. description imc-2220 22 h 10 % er e3 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number imc 2220 er 220 k product family size package code inductance value tol.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
